OwnerAlex Hausman
LocationRockwall, Texas United States map
Web/EmailWebPage email image
Vehicle2002 Suzuki GSX600F Katana
SOLD but will keep this page up for posterity
sake and in the event it
proves useful for anyone else. Good luck on
your builds!

I am selling my motorcycle conversion project.
I have over $4,500 invested but will party
with the whole setup for $2,000. I would like
to see this kit I've assembled put together by
someone who has the time to do so. I
therefore would rather not part it out even
though it will likely bring less that way.
Make an offer, you'd be surprised what I'd let
it all go for to the right home.

A shared folder with a bunch of pictures and
details is here:
http//drive.google.com/open?
id=1jsXg0yobmi4oPEsbyC-
msB05fFedP7sl

Please contact me at whatever means is easiest
for you:
alexanderhausman at gmail dot com
903 - two one seven - eleven 56

Clear Tennessee rebuilt title in hand. I had
it registered
and licensed with a plate but both are now
expired. I wanted to
be sure I could ride it on the road before I
built it. It has a front
fender and gutted tank. The lower part of the
frame is removable
with bolts which should make mounting
components more
straightforward.
MotorD&D Motor Systems, Inc. ES-10E-33 Separately Excited DC
24-48 VDC Separately Excited with mounting
plate/rings and
motor outline drawing. Has been used
successfully at 72V which
is how I planned to run it.

Forum link:
WebPage /> Electric-Mayhem

I emailed with DaveAK, the original poster in
the previous link,
about his build and he loved running this
motor at 72V.

Buy online for $650+
ControllerCurtis Sigma Drive Separately Excited Motor Model SET835M
With technical manual, wiring diagram and
connector/pins.
Programmed for my D&D SepEx Motor by Barefoot
Motors (no
longer in business) for use on their electric
utility vehicle ATV.

WebPage /> industrialgroup.com/Products/Motor-
Controllers/Motor-Controllers-Industrial-
Vehicles/Sigmadrive/Induction-Motor-Controller

D51011.05 BQ09090112
Batteries24 GBS LFMP60AH, 0.00 Volt, Lithium-Ion
Minimal cycles (~20) and have been in storage
state/voltage.
See spreadsheet for current voltages (3.18-
3.25V)

WebPage target="_blank">WebPage /> ion-batteries

WebPage target="_blank">WebPage /> 4327-
220349394/72V60Ah_lithium_power_battery_for_el
ectric_scoote
r_motorcycle_golf_cart_etc_GBS_LFP60Ah.html?
spm=a2700.icbuShop.41413.8.5d802fb2UBXKFF

WebPage target="_blank">WebPage /> parts/batteries/lithium/gbs-12v-4-cell-60ah-
lifemnpo4.html

~$50+/cell = $1,200 new
System Voltage72 Volts
Charger EPS EMC72-15
eLite Power Systems Lithium Battery Charger
Model
EMC72-15 - 87V 15A output with user manual.

Also second charger: Model WL-089-05�
Output DC 72V 3A with input and output cables.
DC/DC ConverterSure Power Industries, Inc Model 71030i
Includes connectors/pins and installation
instructions.

WebPage /> blic/bussmann/T
ransportation/Resources/instructions/BUS_CBT_I
NST_180127a.pdf
InstrumentationBMS included
Seating Capacity2
TiresIncluded
Additional FeaturesBattery Management System: eLite Power Solutions (EPS) BMS-24
Hub, control unit, state of charge (SOC) display, front boards,
cabling, etc.

Primary Charger:
eLite Power Systems Lithium Battery Charger Model
EMC72-15 - 87V 15A output with user manual.

Second Charger:
Unknown Make, Model WL-089-05�
Output DC 72V 3A with input and output cables.

Solenoid/Contactor: Curtis Albright 72V Model SW180B-12
With bracket kit part number 2065-167A.
~$50-70 without mount kit

Solenoid: Model MZJ-200 48-48A Main Solenoid
200 Amp $60-80

Fuse Block: Generic with two 400A fuses
$22 each for fuses

Throttles: Magura Twist Grip Throttles (2 sets)
0-5K Ohm comes with matching grip for opposite side and
instruction manual.
WebPage
$50-60 each

Documentation:
Many miscellaneous drawings, schematics, manuals, and reference
materials in a
mix of electronic and hard copy formats.

Miscellaneous Parts:
Plexi-glass, battery mock-ups, battery tie-down straps, etc.
I would like to sell this entire setup as a ready to build kit for
$2,500. I have over $4,500 in
parts
and have not been able to start on it. My loss is your gain!

Additional Included Items:

Battery Management System: eLite Power Solutions (EPS) BMS-24
Hub, control unit, state of charge (SOC) display, front boards,
cabling, etc.

Primary Charger:
eLite Power Systems Lithium Battery Charger Model
EMC72-15 - 87V 15A output with user manual.

Second Charger:
Unknown Make, Model WL-089-05�
Output DC 72V 3A with input and output cables.

Solenoid/Contactor: Curtis Albright 72V Model SW180B-12
With bracket kit part number 2065-167A.
~$50-70 without mount kit

Solenoid: Model MZJ-200 48-48A Main Solenoid
200 Amp $60-80

Fuse Block: Generic with two 400A fuses
$22 each for fuses

Throttles: Magura Twist Grip Throttles (2 sets)
0-5K Ohm comes with matching grip for opposite side and
instruction manual.
WebPage
$50-60 each

Documentation:
Many miscellaneous drawings, schematics, manuals, and reference
materials in a
mix of electronic and hard copy formats.

Miscellaneous Parts:
Plexi-glass, battery mock-ups, battery tie-down straps, etc.

code by jerry