| Owner | T. Sandstedt |
|---|---|
| Location | Yuma, Arizona United States map |
| | |
| Vehicle | 2009 48v 1000w Electric Mini Chopper |
| Motor | Unite Motor MY1020 Brushless DC 48v 1000w Electric Motor |
| Drivetrain | 8mm 11 tooth front/ 54 tooth rear. Will upgrade soon to 13 tooth/72 tooth. |
| Controller | Yi Yun 48v 1000w Electric Scooter Controller |
| Batteries | 4, 12.00 Volt, Lead-Acid, AGM 4 12v 12ah b&b in series |
| System Voltage | 48 Volts |
| Charger | Yi Yun 48v charger 1-3amp 3pin |
| Heater | none I live in Yuma Arizona |
| Instrumentation | Key switch with 2 keys. |
| Top Speed | 30 MPH (48 KPH) 30-32 mph will go faster when I get bigger sprockets |
| Acceleration | pretty good |
| Range | 30 Miles (48 Kilometers) approx. 30 mile range |
| Seating Capacity | 1 rider {Recommend 13+} |
| Curb Weight | 0 Not sure but I'd say no more than 225-250 lbs. |
| Tires | 10X7 rear 3 inch tire {16 inches total height, 20 X 175 front with 20 X 2.0 {50-406} tire |
| Conversion Time | 4 weeks |
| Conversion Cost | $1,300.00 |
| Additional Features | Fiberglass fenders and tank. Bobber style solo seat. 48v charging port on right side. |
| This is my first Electric Mini Chopper. I bought the rolling chassis off ebay and did most the work myself. It's 7 ft. long and 37 inches tall. It's 3/4 size but I'm 6 ft and it fits me fine. Recommended age 13+ Definitely not a childrens toy. Plan to get larger sprockets and front caliper brakes. | |
