| Owner | Marc Cyr | ||||
|---|---|---|---|---|---|
| Owner's Other EVs | Fat Cruiser Bladez ultrascooter Boreem Ripper #2 Kazuma Meerkat 90 | ||||
| Location | Port Charlotte, Florida United States map | ||||
| | |||||
| Vehicle | Western old and rusty 70 something 3 wheel granny bike | ||||
| Motor | Skil-Saw 12 Amp Series Wound DC old and dusty Rockwell | ||||
| Drivetrain | direct drive ,13 freewheel,52t on axle, | ||||
| Controller | stock saw switch,cable activated with brake lever | ||||
| Batteries | 5 Werker 12-12, 12.00 Volt, Lead-Acid, AGM | ||||
| System Voltage | 60 Volts | ||||
| Heater | florida sun | ||||
| Top Speed | 20 MPH (32 KPH) 20 mph while pedaling,maybe 15 without gearing is way to high,with new sprocket,maybe about twenty mph without peddaling | ||||
| Acceleration | lame,but getting better | ||||
| Range | 10 Miles (16 Kilometers) and pack still reads 60v | ||||
| EV Miles |
| ||||
| Seating Capacity | 1 adult | ||||
| Curb Weight | 0 heavy | ||||
| Tires | dry rotted | ||||
| vehicle in process,will be updating UPDATE tried 52 tooth sprocket,it helped quite a bit,but still not enough i think i will change the freewheel pinion from 16 to 13 tooth. update,13t freewheel helped a lot,it does over twenty without pedals im now going to lace 20"rims to the rear hubs.this should get the gearing about pefect,and will help a lot with stability update, with new 20" wheels im getting about 25 mph without pedals,better stability and acceleration,but the gearing is still to high,will be going with a 60t sprocket next,hopefuly that will get it.i really dont want to use a jackshaft,the bike already has three chains.4 chains will create too much drag | |||||

